| BOARD HANDLING |
| Maximum Board Size (X x Y) |
609.6 mm x 508 mm (24” x 20”) |
| A dedicated workholder is required for boards with an X size greater than 20” |
| Minimum Board Size (X x Y) |
50.8 mm x 50.8 mm (2” x 2”) |
| Board Thickness |
0.2 mm to 5.0 mm (0.008” to 0.20”) |
| Maximum Board Weight |
4.5 kg (10 lbs) |
| Board Edge Clearance |
3.0 mm (0.118") |
| Underside Clearance |
12.7 mm (0.5") standard Configurable for 25.4 mm (1.0”) |
| Board Hold-Down |
Fixed top clamps, centernest vacuum |
| Board Support Methods |
Magnetic pins |
| |
Optional: Vacuum side dams, vacuum pins, support blocks, dedicated fixtures, patented auto tooling, Quik-Tool |
| PRINT PARAMETERS |
| Maximum Print Area (X x Y) |
609.6 mm x 508 mm (24” x 20") |
| Print Gap (Snap-off) |
0 mm to 6.35 mm (0" to 0.25") |
| Print Speed |
0.635 mm/s - 304.8 mm/s
(0.025 in/s - 12 in/s)
|
| Print Force |
0 to 22.7 kg (0 lb to 50 lbs) |
| Stencil Frame Size |
737 mm x 737 mm (29" x 29")
Adapters available for smaller sizes
|
| VISION |
| Vision Field-of-View (FOV) |
10.6 mm x 8.0 mm (0.417” x 0.315”) |
| Fiducial Types |
Standard shape fiducials (see SMEMA
standards), pad/aperture
|
| Camera System |
Single digital camera
- MPM patented look up/down vision
|
| PERFORMANCE |
| Total System Alignment |
±12.5 microns (±0.0005”) at 6 sigma, |
| Accuracy and Repeatability |
Cpk ≥ 2.0* |
| Qualification is performed using production environment process variables; print speed, table lift and camera movement are included in the capability figure. |
| Wet Print Deposit |
±20 microns (±0.0008”) at 6 sigma, |
| Accuracy and Repeatability |
Cpk ≥ 2.0* |
| Based upon actual wet printing with positional accuracy and repeatability verified by a 3rd party measurement system. |
| Cycle Time |
11 seconds standard |
| FACILITIES |
| Power Requirements |
200 to 240 VAC (±10%) single phase @50/60Hz, 15A |
| Air Supply Requirements |
100 psi at 4 cfm (standard run mode) to 18 cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5 L/s), 12.7 mm (0.5”) diameter line, OD x 9.5 mm (3/8”) ID line |
| Height (excluding light tower) |
1589.4 mm (62.57") at 940 mm (37.0”) transport height |
| Machine Depth |
1394 mm (54.88") |
| Machine Width |
1195.4 mm (47.06”) |
| Minimum Front Clearance |
508 mm (20.0”) |
| Minimum Rear Clearance |
508 mm (20.0”) |
| Machine Weight |
797 kg (1757 lbs) |
| Crated Weight |
1090.5 kg (2399 lbs) |
